Joyetech Espion Infinite 230W Vape Starter Kit

Joyetech Espion Infinite 230W Vape Starter Kit Description:

Pushing the boundaries of ordinary for years, Joyetech has set forth another brilliant path to greatness with its highly innovative addition to the vaping market, the new Joyetech Espion Infinite 230W Starter Kit. It’s a marvelous combination of the Espion Infinite MOD and the ProCore Conquer Tank. The Espion Infinite MOD features a brilliant design, boasting with a tunnel light effect using colorful LED lighting, top mounted adjustment buttons, a side firing button, and a 0.96 inch TFT color screen. Available in several colors, you’ll find its appearance is very dazzling, vibrant, and full of color, making it one of the most appealing MOD’s on the market. Aside from its pleasing looks, the Espion Infinite MOD is capable of housing dual 21700 batteries, and can even take on dual 18650 batteries as well. It sports a micro-USB port on the backside, which offers a 2A quick charge rate. Along with a slew of great tech packed into the device, such as temperature control, TCR adjustments, and the ability to reach up to 230 watts. The included Joyetech ProCore Conquer Tank is just as fascinating in both its appearance and performance. At the top you’ll find a resin 810 wide bore drip tip with a unique pattern design, while just blow the top cap is a push-to-open top fill design. The ProCore Conquer Tank also adopts a new bulging glass tube, delivering a new shape, and an upgraded capacity of 5.5ML. To enhance its performance, dual adjustable airflow control rests at the base, while the tank utilizes the Pro C Series vape coils for a smooth and flavorful experience.

What's Included:

• 1 x Joyetech ESPION Infinite Vape MOD
• 1 x Joyetech ProCore Conquer Sub Ohm Vape Tank
• 2 x 21700 AVB 4000mAh 30A High Drain Batteries Included
• 1 x ProCA-0.4ohm DL Coil (Pre-Installed)
• 1 x ProCD-0.15ohm DL Coil
• 2 x 18650 Battery Adapter Sleeves
• 1 x Spare Pyrex Glass Tank
• 4 x Silicon Rings
• 1 x USB Firmware Upgrade Cable
• 2 x Manual and Warning Card
• 1 x Warranty Card Authenticity Code on Box

Specs & Features:

• Size: 49.5mm(L) x 33.0mm(W) x 89.0mm(H)
• Screen type: 0.96-inch TFT Color display
• Screen resolution: 80 x 160 dpi
• Output wattage: 1-230W
• Output mode: Power/RTC/TC(Ni,Ti,SS316)/TCR(M1,M2,M3) mode
• Resistance range: 0.05-1.5ohm for TC/TCR mode; 0.1-3.5ohm for Power mode
• Temperature range: 100-315°C/ 200-600°F
• Requires: 2 x High Amp 21700 Batteries or 2 x 18650 High Amp Batteries (2 x 21700 Batteries Included)
• Max output current: 50A
• Max output voltage: 9V
• Max charging current: 2A
• Thread: spring-loaded 510
• 0.96-inch TFT color display
• Sparkling LED light
• 230W Max output
• Top refill and bottom airflow
• All-new ProCD-0.15ohm coil head
• Equalizing charge system
• Supporting 2A quick charge
• Onboard reverse polarity protection
• Dual circuit protection
• Upgradeable firmware
• External Battery Charger Should be Use for Charging Batteries

ProCore Conquer Sub Ohm Vape Tank:

• Size: 25mm x 55.5mm
• Diameter: 25mm
• Retractable Top Fill Design
• Bulb Glass Design
• Dual Airflow Slots
• Wide Bore Snake Resin Drip Tip
• E-liquid Capacity: 5.5m
• l Resistance: ProCA 0.4ohm/ProCD-0.15ohm
• Applicable heads: ProCA & ProCD series heads
• ProCA Coil: Kanthal DL 0.4ohm (Best at 40-80 Watts)
• ProCD Coil: Kanthal DL 0.15ohm (best at 40-80 Watts)
• Threading Type: 510

WARNING: This is an advanced Item. Please use at your own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. DirectVapor is not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish and packaging may vary